SCK33 Series Open Loop Current Sensor
Based on Hall effect measurement principle, open loop circuit mode.
The isolation voltage between primary and secondary is greater than 3000VAC.
Easy to install, small size, does not take up space.
Comply with UL94-V0 flame retardant rating.
Single-chip programmable Hall IC is adopted.
Can measure DC, AC, pulse, and various irregular waveforms under isolated conditions.
+5V working voltage, fast response speed, low zero drift, low temperature drift, high accuracy and good linearity.
Dynamic performance (di/dt and response time) is optimal when the busbar is fully filled with primary perforations.
Dimension & Wiring:
1. Size error: ±0.5mm;
2. Primary aperture: φ18mm;
3. Fixed lead: φ1.0mm*3
4. Pinpoint output: □ 0.64*0.64mm, pitch 2.54*2mm;
5. The IP indication direction is the positive direction of the current;
6. The temperature of the primary conductor shall not exceed 105°C;
7. Incorrect wiring may cause damage to the sensor.